Pot Still Set 6

890,00 €

2 Items

  • LM rectification column - Distiller

    Electronic heater version


    What makes this column stand about the rest is its continuous distillate collection capability at a purity of between 94 - 96% without diminishing in the quality of the distillate at any point in the process.

    Average efficiency is between 1 – 1.5 L per hour.

    The set of 2,4 m height helps in obtaining chemically pure product.

    The LM system includes an internally regulated reflux by a Highflow needle valve, which aids in the collection of the pre-run, followed by the actual run and finally the post-run used in the next batch.

    Ease of use of use is ensured by just a few simple steps in the operating instructions.

    Safety of operation is guaranteed by its open, pressure-less system design.

    The cooling head is constructed of a corrugated tube ensuring maximum cooling with minimal water usage of around 45 L per hour, it can be removed for ease of cleaning.

    Temperature measurement is by an electronic thermometer accurate to 0.01 °C.

    The third thermometer set at a height of 40 cm to the container facilitates in controlling the process. 

    A yield of about 7 L of pure consumable distillate is possible to achieve with this apparatus from a raw mixture of 45 L.


    The uniqueness of the set is in the usage of the additional cooler, essential for cooling the distillate. Alcohol that has been cooled to about 15 oC can be filtered through the actived carbon. The set is equipped with an activated carbon filter having the length of 0.7 m. Once the process has finished, the used carbon should be changed. The filter also has a removable hook that makes it possible to be used separately.


    During the process the heating power should be set in such a way that the column would be able to work under the threshold of flooding. Thanks to that, the filler will work at the whole resolution giving the best distillate.

    For this purpose, the sight-glass with visible grade of flooding would help obtain a preview of the distillation process.

    Entire construction is argon-TIG welded and subsequently heat treated.

    Thanks to its catalytic filter and clamp connectors ensuring quick assembly, this apparatus is designed for the collection of aromatic alcohols – this requires the distillation head to be re-mounted at a height of 25 cm from the container and setting of the collection valve to its maximum position – to enjoy a fantastic fruity taste.

    In this case, the usage of the amperage regulator is recommended in order to set the heating power.


    Thanks to its precise construction and functionally-oriented design, this apparatus is easy to use, flawless, and completely safe. Assembly and disassemble takes only a few minutes. This still allows for the collection of a beverage of high purity in a taste of your choice. Dare to convince yourself to see what you can come up with. Free from unpleasant odors. Cleanly, quickly and conveniently. 

    Technical parameters:
    - column height 1,75 m,
    - tube 60.3 mm,

    - 50 L capacity tank,

    - height of complete apparatus 2,40 m,
    - connection of the tube and the head – clamp connector,
    - connection of the column and the container – clamp connector,
    - micrometric valve of acid-resistant steel,
    - cooling head of corrugated KO steel,
    - two thermometers: one electronic needle-type for the precise measurement of the distillation head to 0.01 °C and the other a panel-type for the measurement of the container temperature.

    - two heaters (2 kW and 1,4 kW) on independent circuits, 
    - 2 m silicon hose,
    - vent built into the distillation head,
    - ball valve of ½ stainless steel for the drainage of the distillate with a 12mm spigot to fit the hose, 
    - set of 17 stainless steel filters and 0.8 L of prismatic copper springs.

    - 25 cm catalytic converter for use with the prismatic springs, secured at its bottom with an acid-resistant mesh.

    The apparatus is covered by 24 month guarantee.

    All components of the apparatus undergo rigorous quality control and assembly.

    Every threaded connection is sealed with Teflon tape.

    After assembly the product is ready for use.

    Also on offer:
    Detailed operating instructions, including:
    - A description of how the rectification column works, 
    - The processes related with its operation,
    - Raw mixture recipes

    The operating instructions are divided into two sections. The first 2-page part contains the more important temperature data as well as information essential for the distillation process to be started and finished. The second 19-page part discusses the processes that occur inside the distillation column as well as a specific guidelines of distillation. It also contains a history of distillation, tried and true sugar- and fruit-based raw mixture recipes, safety instructions during the distillation process, filtration methods, the setting of the purity of the distillate and much more useful information.

    The still can also be used for the collection of distilled water or other consumable or industrial liquids, such as: flower essences or concentrated aromatic substances.

    Please come take a look!

    • Column height 1,75 m
    • The outside diameter of the tube 60,3 mm
    • Capacity tank 50 L
    • Height of complete apparatus 2,40 m
    • Connection of the tube and the head clamp connector
    • Connection of the column and the tank clamp connector
    • Stainless steel filters 17 pieces or 5L glass packing - tubes
    • Prismatic copper springs 0,8 L
    • Spiral scrubber copper No
    • Type of cooler corrugated stainless steel tube
    • Catalytic converter for use with the prismatic springs Yes

    5 other products in the same category: